NEWS CENTER
Introduction to the characteristics of first punch bushing
- Categories:News
- Author:
- Origin:
- Time of issue:2022-10-08
- Views:0
(Summary description)The first punch bushing includes a bushing body. The bushing body includes a bottom liner, a lining and a face lining. The bottom lining, the lining and the face lining are stacked in sequence from the inside to the outside to form an integrated structure.
Introduction to the characteristics of first punch bushing
(Summary description)The first punch bushing includes a bushing body. The bushing body includes a bottom liner, a lining and a face lining. The bottom lining, the lining and the face lining are stacked in sequence from the inside to the outside to form an integrated structure.
- Categories:News
- Author:
- Origin:
- Time of issue:2022-10-08
- Views:0
The first punch bushing includes a bushing body. The bushing body includes a bottom liner, a lining and a face lining. The bottom lining, the lining and the face lining are stacked in sequence from the inside to the outside to form an integrated structure. The position is provided with an accommodating groove that is adapted to the mold, and a wear induction area is arranged in the surface lining. The two ends are connected to the surface lining and the bottom lining.
The first punch bushing manufacturer tells you to provide a bushing with a multi-layer structure, including a face lining, a lining and a bottom lining. The wear-sensitive area on the face lining can fine-tune the position of the backing through a spring, so as to protect the die punch from being damaged. Wear-resistant, convenient and practical, and low cost.
The first punch bushing includes a bushing body, and is characterized in that: the bushing body includes a bottom lining, a lining and a face lining, and the bottom lining, the lining and the face lining are sequentially stacked from the inside to the outside to form an integrated structure. The bushing manufacturer tells you that the bushing body is provided with an accommodating groove adapted to the punch at a position corresponding to the bottom liner, the face liner is provided with a wear sensing area, and the bottom end of the wear sensing area is connected by a spring The top end of the bottom lining is provided with a through groove for accommodating the spring, and the two ends of the through groove communicate with the surface lining and the bottom lining.
Scan the QR code to read on your phone
CONTACT FORM
We’ll take the time to explain the recommended solution and its price
CONTACT US
Contacter: Lina Bei
Cell-phone No.: +86 13283291408
Telphone No.: +86-317-2229112
Email: cy3@cnhuachao.com
What's app: +86 13283291408
Copyright © 2019 Renqiu Huachao Screw Tools Co., Ltd.