News_Best pozi header punch_phillips punch pin_carbide heading die_screw header punch_bolt trimming die china

NEWS CENTER

Position:

News

05-23 

Hex punch pin manufacturers take you to understand why the punch is easy to break

Why is the punch easy to break? How to deal with it? Besides the punch material and the design of the punch itself, what other reasons do hex punch pin manufacturers tell you?

05-17 

Processing technology of flat thread rolling die

The process route of flat thread rolling die is: blank forging → quenching and tempering → machining → inner hole quenching → machining (thread rolling) → outer diameter melting and tempering → inspection.

05-10 

The flat thread rolling die manufacturer will show you how to choose the material of the rolling die

The manufacturers of flat thread rolling die tell you that the most important characteristics for choosing the material of the rolling die are the hardness, toughness and wear resistance of the die steel.

05-01 

Wire drawing die manufacturers take you to understand the main failure modes of wire drawing die

After decades of development, many new wire drawing die materials have appeared. Drawing dies can be divided into alloy steel dies, cemented carbide dies, natural diamond dies, polycrystalline diamond dies, CVD diamond dies and ceramic dies.

04-25 

Brief introduction of wire drawing die products

Wire drawing die usually refers to various dies for drawing metal wires, as well as wire drawing dies for drawing optical fibers. All drawing dies have a hole in the center of a certain shape, round, square, octagonal or other special shapes.

04-19 

The first punch bushing manufacturer will show you what the big role of tungsten steel bushing is

The first punch bushing manufacturer tells you that in the moving parts, the parts are worn due to long-term friction. When the gap between the shaft and the hole is worn to a certain extent, the parts must be replaced.

04-12 

The first punch bushing manufacturer will take you to understand the specific functions of the mold accessories

The first punch bushing manufacturer tells you that in industrial production, the mold is an indispensable equipment for production and processing, and the mold accessories are the most important accessories in the mold.

04-03 

Polycrystalline Diamond Drawing Die manufacturers take you to understand the drawing principle of drawing dies

Polycrystalline Diamond Drawing Die manufacturers tell you that the application rate of drawing dies is becoming more and more common. During the operation, the appropriate operation method will be selected.

03-27 

Polycrystalline Diamond Drawing Die manufacturers take you to understand how to improve the quality of drawing dies

The manufacturer of Polycrystalline Diamond Drawing Die tells you that the drawing die can meet certain requirements during use, but in the production process, it must be operated in strict accordance with the operating procedures to achieve good results.

03-20 

screw header punch manufacturer will show you how to avoid the deformation of the punching die

screw header punch manufacturers tell you that high-quality mold thimbles have the characteristics of high hardness, good toughness, wear resistance, etc., but no matter how high-quality thimbles may be deformed during use, why is this?